Kodak NexPress

Tested and approved by Kodak for the NexPress, PCL3 Digital® labels and sheets in all materials (papers and polyesters) can be used.

	Kodak NexPress

NexPress
The NexPress is a hot fusing toner, production digital press. It has very specific quantity requirements of base materials, particularly self adhesive labels and sheets.

Self adhesive sheets are fed from the main feed trays face down and are turned over at the end of the machine prior to printing.

As the majority of self-adhesive sheets are designed to be flat but with any curl bias towards the backing, particular care must be taken. In order to reduce the effects of the heat from the machine 'drying' the laminate and causing curl towards the backing; sheets should not be loaded into the feed tray until ready to print.

General Information
All PCL3 Digital sheets® and labels are bagged and boxed to ensure optimum moisture conditions are maintained.

When removing the required number of sheets from the packaging ensure that any remaining unused are re-bagged, and boxed immediately.

Discard any sheets showing severe curl towards the backing paper as they could cause mis-feeds.