Prinint Guidelines - Konica Minolta

The following guidelines are given as an aide to choosing the most
suitable printer settings for each material - all materials were in die cut
label form PCL3-51 (51mm diameter circles) when tested

All normal guidelines for laser printing self adhesive labels should also
be followed;
• Always fan the sheets well before printing
• Take particular care when knocking up the sheets not to ‘bend’ the
edges and cause the labels to ‘lift’ - discard any sheets that are
damaged
• Select the feed tray appropriate to the machine and stock
capabilities. The most direct feed path available will normally
produce the best results

Konica Minolta
Material Machine Setting Performance
Machine Coated Gloss: Permanent & Removable coated gloss 210 -256gsm Good feed & toner key
Machine Coated Matt: Permanent coated matt 210 - 256gsm Good feed & toner key
Cast Coated: Permanent coated gloss 210 - 256gsm Good feed & toner key
Antique White Laid: Permanent matt laser 210 - 256gsm Good feed & toner key
Gloss Clear Polyester: Permanent coated gloss 163 - 209gsm Ensure air between sheets Good feed & toner key
Translucent Clear Polyester: Permanent coated matt 163 - 209gsm Ensure air between sheets Good feed & toner key
Gloss White Polyester: Permanent coated gloss 163 - 209gsm Ensure air between sheets Good feed & toner key
Matt White PE: Permanent coated matt 300gsm Good feed & toner key Choose image with care as heavy weight of material plus heavy image may leave a partial toner impression on the belt